Problem | Cause | Correction |
---|---|---|
Rough Finish | Wheel too coarse or too hard | Softer wheel, increase work speed, dress coarser, reduce wheel speed |
Diamond too sharp | Try dull diamond | |
Dressing too coarse | Slow down dress traverse, lighter dress | |
Cut too heavy | Try lighter side | |
Traverse too fast | Slow down speed | |
Work speed too fast | Decrease work speed | |
Lack of proper steadyfast | Lighter stock removal, softer wheel | |
Dirty coolant | Change coolant | |
Solution of coolant too weak | Adjust concentration |