| Material & Job | Specification |
|---|
| Crankshaft, Automotive | |
|---|---|
| Pin Bearing | WAA54-M5-V1 |
| Main Bearing | WAA54-M5-V1 |
| Regrinding | WAA54-M5-V1 |
| Crankshaft, Diesel | |
| Pin Bearing | WAA54-M5-V1 |
| Main Bearing | WAA54-M5-V1 |
| Cutlery, Knives | |
| Hemming Carbon | WAA80-I5-B60 |
| Stainless | RAA70-I5-B60 |
| Offhand Surfacing | WAA120-J8-V1 |
| Cutters, Molding | |
| Offhand | WRA60-L5-V8 |
| Dies, Forging | |
| Cleaning | A46-M-V1 |
| Dies, Drawing | |
| Cleaning | WRA60-J8-V8 |
| Surface, Segments | 8A30-G800-VOS |
| Surface, Cylinder | RAA46-H800-VOS |
| Surface, T-1 | RAA46-G800-VOS |
| Drills | |
| Cut-Off | A46-P5-B20 |
| Cylindrical | WAA60-L8-V1 |
| Centerless | WAA60-L8-V1 |
| Precision Sharpening | WRA80-L8-V1 |
| Point Thinning | A70-M5-B10 |
| Drills | |
| Small, Regrinding | WRA80-L8-V8 |
| Large, Regrinding | WRA46-L8-V8 |
| Exotic (Refractory) Metals | |
| Centerless | WRA60-K8-V1 |
| Surface, T-1 | RAA46-G800-VOS |
| Surface, Segments | 8A30-G800-VOS |
| Ferro-tic | |
| Roughing | RAA46-G800-VOS |
| Finishing | 9A100-G800-VOS |
| Forgings | |
| Snagging | |
| 12500 SFPM | YB124-R5-B51F |
| 9500 SFPM | A14-P5-B10 |
| Portable | A16-P5-B10 |
| Surface, Segments | 97A30-G800-VOS |
| Surface, Cylinder | WAA301-G8-V8 |
| Gages–Plug | |
| Cylindrical | WAA80-K8-V8 |
| Gages, US Thread | |
| Coarse Pitch | XL1002-T12-BFM2 |
| Medium Pitch | XL1502-T12-BFM2 |
| Fine Pitch | XL1802-T12-BFM2 |
