Burnt Work or Cracked Surfaces |
Wheel too hard |
Try softer wheel or make act softer |
Wheel structure too dense |
Try more open structure wheel |
Wrong wheel bond |
Consult Radiac Application Department |
Grinding wheel over speed |
Reduce speed |
Work revolving too slowly |
Increase work speed |
Grinding cut too heavy |
Rough and finish grind with two wheels |
Insufficient coolant |
Check coolant level, pipes and pumps |
Nozzle not directing coolant properly |
Redirect flow or obtain new nozzle |
Wrong Coolant |
Consult Radiac Applcation Department |
Grinding wheel improperly trued |
Redress wheel |