Industrial Grinding Recommendations
The following recommendations are organized alphabetically. Use the menu's on the top and bottom of the table to locate your particular recommendation.
| Rolls, Paper Mills, Chilled Iron, Rubber Covered Stonite, Granite, Brass, Copper |
| Roughing |
C36-N-ES |
| Rough & Finish |
C60-L-ES |
| Finish |
C100-L-ES |
| Aluminum Mill Rolls |
Same As Cold Mill Rolls |
| Cold Mill Back Up Rolls |
WAA36-J5-B35 |
| Cold Mill Work Rolls (Tandem) |
| First Stand |
WAA36-J5-B35 |
| Other Stands |
SA60-J1200-BCFS1 |
| Cold Mill Work Rolls (Temper) |
| Final Stand |
C150-N-ES |
| Other Stands |
SA60-J1200-BCFS1 |
| Hot Mill Back Up Rolls |
| Forged Steel on Iron Core |
8BAC362-L7-B34
8BAC362-M900-B34 |
Hot Mill Work Rolls (Chilled Iron or Nickel Alloy)
|
| Regrinding |
C362-J5-B35 |
| Roughing New Roll |
C24-L5-B10 |
| Finishing New Roll |
C362-J5-B35 |
| Saws, Band (16 Gauge & Heavier) |
WRA46-L8-V8 or A465-O5-B60 |
| Saws, Band (17 Gauge & Lighter) |
WRA60-M8-V8 or A465-O5-B60 |
| Saws, Circular (Coarse Teeth) |
WRA46-M8-V8 or A465-O5-B60 |
| Saws, Circular (Fine Teeth) |
WRA60-M8-V8 or A465-O5-B60 |
| Saws, Metal Cutting |
WRA46-M8-V8or A465-O5-B60 |
| Scissors and Shears (Steel) |
| Resharpening |
| Small Wheels |
WRA120-L8-V1 |
| Large Wheels |
WRA90-L8-V1 |
| Shear Blades |
| Cylinder |
97A30-G800-VOS |
| Segments |
97A30-H800-VOS |
| Side Gears, Auto |
WRA60-K8-V1 |
| Slate |
|
| Cut-Off |
C24-S5-B20F8 |
| Molding |
C46-L8-V4 |
| Spline Shafts |
| Centerless |
A60-L5-V1 |
| Cylindrical |
WAA60-L8-V1 |
| Surfacing Splines |
WAA60-L8-V1 |
| Steel Castings |
| Snagging |
| 12500 SFPM |
YB143-R5-B51F |
| 9500 SFPM |
A16-R5-B10 |
| Portable |
A16-R5-B10 |
| Steel, Hardened |
| Centerless |
WAA60-L8-V1 |
| Cylindrical |
WAA60-K8-V1 |
| Surface, Segments |
8A30-H800-VOS |
| Surface, Cylinder |
RAA30-G800-VOS |
| Surface, T-1 |
RAA46-G800-VOS |
| Internal |
RAA60-K8-V8 |
| Cut-Off |
A46-P5-B20F8 |
