Industrial Grinding Recommendations
The following recommendations are organized alphabetically. Use the menu's on the top and bottom of the table to locate your particular recommendation.
| Gages, Hardened Steel |
| 18-20 DP |
RAA120-J8-V8 |
| 5-18 DP |
RAA60-I8-V8 |
| 2-5 DP |
RAA60-I8-V8 |
| Gears, Hardened Steel |
| Internal |
RAA60-K8-V8 |
| Surface, Segments |
8A30-H800-VOS |
| Surface, Cylinder |
RAA46-H800-VOS |
| Surface, T-1 |
RAA46-G800-VOS |
| Glass, Tubing |
| Cylindrical |
C60-J5-V4 |
| Internal |
C80-H5-V4 |
| Gray Iron |
See Malleable Iron - Unannealed |
| Hammers, Claw |
A46-R5-B10 or A30-R5-B10 |
| Hobs |
| T-1 Wheels |
WRA60-J8-V8 |
| Dish Wheels |
WRA60-K8-V8 |
| Knives |
See Cutlery |
| Knives, Machine |
| Barker, Hog Planer, Low Alloys and Carbon Steels |
| T-1 Sharpening |
RAA60-J800-VOS |
| Cyl. Sharpening |
WA462-F11-V8 |
| Seg. Sharpening |
8A30-G800-VOS |
| NI Cyl. Sharpening |
A46-I5-B60 |
| Chipper, Paper, Veneer, Thin High Speed |
| T-1 Sharpening |
RAA60-I800-VOS |
| Cyl. Sharpening |
WA462-F11-V8 |
| Seg. Sharpening |
8A30-H800-VOS |
| NI Cyl. Sharpening |
A46-I5-B60 |
| Molding, Offhand |
WAA46-L8-V8 |
| Section Beveling |
WAA36-K8-V8 |
| Surfacing Backs |
WAA46-J8-V8 |
| Lawn Mower Blades |
WAA46-L8-V8 |
| Leather |
See Acrylics |
| Machine Shop Grinding |
| General Offhand |
A46-M5-V1 |
| Gen Seg Grind |
97A30-G800-VOS |
| Malleable Iron - Annealed |
| Snagging |
| 12500 SFPM Snagging |
YB124-R5-B51F |
| 9500 SFPM |
YB124-Q5-B51F |
| Portable |
A16-P5-B10 |
| Malleable Iron - Unannealed |
| Snagging |
| 12500 SFPM Snagging |
YB123-R5-B51F |
| 9500 SFPM |
YB123-Q5-B51F |
| Portable |
CA16-P5-B10 |
| Meehanite |
Same As Cast Iron |
| Monel Metal |
| Cut-Off |
A24-ZX-BNF2 |
| Snagging |
A24-P5-B10 |
| Cylindrical |
C60-J8-V4 |
