Industrial Grinding Recommendations
The following recommendations are organized alphabetically. Use the menu's on the top and bottom of the table to locate your particular recommendation.
| Bushings |
| Cylindrical |
WAA60-K8-V1 |
| Centerless |
WAA60-L8-V1 |
| Internal |
RAA60-K8-V8 |
| Cams, Automotive |
| Roughing |
WAA60-M8-V1 |
| Finishing |
WAA80-M8-V1 |
| Cams, Diesel |
| Roughing |
43A60-L8-V1 |
| Finishing |
43A80-L8-V1 |
| Carbides |
Same As Cemented Carbides |
| Carboloy |
Same As Cemented Carbides |
| Cast Iron |
| Cylindrical |
C46-K8-V4 |
| Centerless |
C46-L8-V4 |
| Internal |
C46-K8-V4 |
| Surface |
C36-I8-V4 |
| Cyl & Seg |
9A30-G800-VOS |
| Snagging |
| 9500 SFPM |
YB143-P5-B51F |
| 12500 SFPM |
YB124-R5-B51F |
| Portable |
CA16-P5-B10 |
| Cemented Carbides |
| Roughing |
| Straight Wheel |
GC60-J5-VL |
| Dish Wheel |
GC60-J5-VL |
| Plate Mounted |
GC60-J14-VL |
| Finishing |
| Straight Wheel |
GC120-J5-VL |
| Plate Mounted |
GC120-J14-VL |
| Centerless |
GC80-M7-V4 |
| Cylindrical |
| Roughing |
GC60-K5-V4 |
| Finishing |
GC120-O5-V4 |
| Internal |
GC80-L5-V4 |
| Chaser |
| Thread |
| Surfacing |
WRA60-J5-V8 |
| Chisels |
| Airdriven |
A46-M5-V1 |
| Woodworking |
| Surfacing |
WAA46-I5-V8 |
| Edging |
WAA60-K5-V8 |
| Sharpening |
WAA80-J5-V8 |
| Chromium Plating |
| Commercial Finish |
RA80-K8-V8 |
| Fine Finish |
RA120-J8-V8 |
| Connecting Rods |
| Internal |
RAA60-K8-V8 |
| Surface, Segments |
97A30-H800-VOS |
